Most individuals in the greater Puget Sound area and Puyallup will only get their garage door serviced when it begins to show symptoms of wear or when something begins to sound funny.
Unfortunately, this is a risky strategy that might cost you more money in the long term. Garage doors, like other mechanical equipment, are subject to wear and tear. Therefore it’s essential to inspect or maintain your garage door regularly.
How Often Should Garage Doors Be Serviced?
As a rule of thumb, garage doors should be serviced once a year, or at least two to four times a year, depending on the amount of usage.
A garage door service most often involves:
- Checking the garage door.
- Testing the opening mechanism.
- Adjusting hardware.
- Tidying up tracks.
- Lubricating all the moving parts.
Well-maintained garage doors tend to function better and longer, so you can get your money’s worth.
Things You Can Do to Maintain Your Garage Door
If you have sufficient garage maintenance knowledge, you may do a monthly check-up to ensure that your overhead door functions correctly. Here are five things to keep in mind while inspecting your garage door every month.
1. Check that the Mechanism is Well-Lubricated
A tiny amount of lubricant may go a long way toward cutting down noise and ensuring the smooth operation of your garage door.
Grease the door opener’s chain or drive screw with a spray lubricant. Lubricating the door’s hinges, rollers, and tracks is also an excellent idea.
2. Check for Any Gaps
A properly sealed garage door is critical for protecting your garage contents and the internal security of your house. Gaps beneath your garage door and between panels allow outside weather and malicious persons to enter, putting your belongings and lives at risk.
It may also let your home’s climate-controlled air escape, increasing your energy bills significantly. When the temperature turns colder, it’s essential for garage doors in Puget Sound to keep a tight seal.
3. Check the Balance of the Door
If your garage door isn’t balanced correctly, the opener will have to work harder each time you open and close the door, reducing its lifespan.
Disconnect the opener by lifting the release handle to see if the door is balanced. Then, partly open or lower the door. If the door is balanced correctly, it will remain in this position without your assistance.
On the other hand, the spring tension must be adjusted if the door begins to collapse or ride up.
4. Check the Cables
Check your cables for damaged strands and any wear and tear around the bottom of the roller bracket. If you observe any wear or damage to the cable, you should get it replaced by a garage door pro.
Adjusting the high-tension cables that raise your garage door is not a good idea. These wires are under enough tension to cause significant injury. You can examine their condition, but the repairs should be handled by a professional.
5. Check Door Parts for Any Damage
Parts like the door’s rollers and wires might wear out over time. Inspect parts regularly to ensure that your door is in good working order. Replace any broken or damaged parts as needed.
Conclusion
It is critical to get your garage door serviced at least once a year by a professional. However, doing your own check-ups is also beneficial. This way, you’ll be aware of any issues with your garage door right away and call in a professional.
Have your garage doors checked or repaired by a garage door repair expert in Washington with Overhead Door Company of Puget Sound! Our garage door company offers garage door repairs, installation, replacement, and more for residences and commercial establishments. To get a free estimate, contact us today!
