If you’re searching for garage door parts, chances are something’s gone wrong with your door, or you’re trying to keep it in great shape. We get it! While we don’t sell garage door parts here at Overhead Door Company of Puget Sound, we still want to help you make sense of what these parts do, how they work together, and what to do when something breaks.
Understanding Garage Door Parts
Your garage door is more than just a big panel that goes up and down—it’s a system of moving parts that all need to work together. Springs help balance the door’s weight, so it doesn’t come crashing down. Cables, which are wound around drums at the top corners, work with those springs to help lift the door. Tracks and rollers guide the door along its path, while hinges let the sections bend smoothly. Add weather stripping to seal it all off, and you’ve got a full system working hard every day.
Inside the opener, you’ve got parts like the motor, sensors, belts or chains, and a logic board that tells the opener what to do. When one of these fails, it could be why your remote won’t work or the door won’t open all the way.
What Are Some Other Parts You Might Hear About?
Besides the basics, there are some parts folks hear that sound more technical—like torsion tubes, bottom brackets, and manual release ropes. Torsion tubes hold your springs in place and help spread the lifting power across the door evenly. Bottom brackets connect the lifting cables to the bottom of the door. And that little red rope? That’s the manual release, which lets you open the door by hand when the power goes out.
Why We Don’t Sell Garage Door Parts
It might seem odd for a garage door company not to sell parts, but there’s a reason for it. Replacing garage door parts can be dangerous. Springs are under a ton of tension and can cause serious injury if removed the wrong way. Even a small mistake—like picking the wrong type of spring or not tightening something correctly—can mess up the whole door system or cause it to break again later.
Instead of handing you a part and wishing you luck, we come to your home with everything ready to go. That means we can look at the problem, fix it right the first time, and make sure everything is safe. It’s faster, more affordable in the long run, and way less stressful.
What to Do When Something Breaks
First off, don’t panic. If your garage door won’t open, slams shut, or is making a terrible noise, give us a call. But before that, make sure no one uses the door—especially if a spring or cable has snapped. Trying to use a damaged door can make things worse.
Then, pick up the phone and call Overhead Door Company of Puget Sound. We’ll set up a service visit, inspect your door from top to bottom, and get to the bottom of the problem. Sometimes it’s a small fix, and other times it’s a more involved repair. Either way, we’ve got the tools and the know-how.
Here’s How We Can Help
Even though we don’t sell garage door parts, we’re ready to help fix or replace them when they wear out. When you book a repair visit with us, we’ll bring along a full stock of common parts so we’re ready for just about anything.
Our techs will run a complete diagnostic of your garage door system, check for safety issues, and make the repair right then and there. We also do tune-ups and maintenance checks, which can help spot issues early—before a part fully fails.
Want to Keep Your Garage Door in Good Shape?
You don’t have to wait until something breaks to give your door a little attention. Garage door systems need basic maintenance just like any other part of your home.
For starters, apply lubricant to the rollers, hinges, and springs twice a year. Look over the cables to make sure they’re not fraying. If you see rust, try to clean it off—or give us a call if it’s spreading. Weather stripping at the bottom of the door should be flexible and sealed tight. If it’s cracked or hard, it’s time to replace it.
Also, be on the lookout for new noises. A loud screech, bang, or grind can be an early warning sign. If your door starts to move unevenly or looks crooked, it’s definitely time to have someone check it out.
How to Spot a Part That’s Failing
Garage door issues don’t always start with something dramatic. Here are a few signs something might be going wrong:
- The door moves slower than usual
- It stops halfway up or down
- You hear loud squealing, scraping, or clunking
- One side of the door looks lower than the other
- Your remote or wall button doesn’t always work
These might seem like small problems at first, but they can get worse fast. Catching them early is the best way to avoid a full breakdown.
Are You Using Smart Garage Door Features?
Lots of people are upgrading their garage doors with smart tech. If your opener connects to Wi-Fi, has a camera, or sends alerts to your phone, you’re already using smart garage parts. These systems are super convenient, but when they stop working, it can be tricky to figure out why.
Whether you’re setting up a new smart opener or fixing a feature that stopped working, we can help with that too. We’ll troubleshoot the issue, recommend upgrades if needed, and make sure everything runs smoothly.
DIY or Call the Pros?
Not everything needs a service call, but a lot of it does. If the job involves batteries, screws, or cleaning, go ahead and do it yourself. If it involves tension springs, lifting cables, or anything that looks like it might fly off—leave it to us.
When in doubt, don’t take risks. A quick call to us could save you a whole weekend of frustration—and avoid injuries or bigger problems later.
Why Trust the Overhead Door Company of Puget Sound?
We know garage doors. And we know the difference between a door that’s “working okay” and one that’s working right. When something breaks, we’ll be there with a quick fix that’s built to last.
We’re local, reliable, and ready to help—without trying to sell you parts you don’t need. We’ll show up with the right tools and get the job done so you can get back to your day.
What are garage door parts called?
Garage door parts include a variety of components like torsion springs, extension springs, rollers, tracks, cables, hinges, drums, and opener components. Each part plays a key role in the safe and smooth operation of your garage door.
How many turns does my garage door spring need?
The number of turns depends on the height of your garage door and the type of spring system. Most standard residential torsion springs require about 30 quarter-turns (or 7.5 full turns) for a 7-foot door. Always let a professional handle spring adjustments.
Do garage door openers go bad?
Yes, garage door openers can wear out over time, especially with frequent use. Common issues include motor failure, worn gears, sensor problems, or issues with the remote or logic board.
What is the toughest part of installing a garage door?
Installing the springs and balancing the door is the toughest part. It requires precision and strength—and working with high-tension parts can be dangerous without the proper training and tools.
Got a problem with your garage door? We’re here to fix it—fast, safe, and with expert service every time. Call Overhead Door Company of Puget Sound at (253) 400-3880 today.
Need a fix? Need answers? Just want to check your system?
Contact us today – let’s get that garage door running like new!
